Owner`s manual
4 Update–Firmware v. 4.101
complete. The MultiMobile is powered directly
from the PC.
15. Connect the MultiMobile to the network by
plugging the (supplied) RJ-45 cable into the
MultiMobile cables RJ-45 receptacle. Plug the
other end of the RJ-45 cable into an available ISDN
outlet.
Windows 95/98 Installation—NDIS
1. Click Start è Settings è Control Panel; then
double-click the Network icon.
2. Click Add. Then click Add Adapter. Scroll down
the list in the Manufacturers text box and select
Multi-Tech. MultiMobile MT128ZLX then
appears in the Models text box. Click OK.
3. The ISDN Configuration dialog box appears. Click
Next.
4. The ISDN Configuration dialog box appears. Set
the switch type and click Next.
5. The ISDN Configuration dialog box appears.
Type the directory numbers and SPIDs numbers, if
necessary, and click Next. Then click Finish. The
NDIS interface now is installed successfully.
Note: The switch type and phone number
must be the same as Multi-Tech’s configu-
ration utility setting. If they are different,
the ISDN configuration setting overwrites
NDIS Installation (Win95/98)