Owner`s manual

Update–Firmware v. 4.101 7
Manual PC Card Installation (NT)
9. Reboot your computer.
10. To make sure the PC Card driver is installed
correctly:
a. Click Start è Programs è
Administrative Tools (Common) è
Windows NT Diagnostics.
b. Open the Services tab and click the
Devices button. Scroll down the Device
list to locate the PC Card. If the status is
Running, the PC Card is installed
correctly. If the status displays Stopped,
double-check the settings in step 7 above.
11. Install the CAPI-based application program, RVS-
COM Lite.
12. Your MultiModem PC Card is now installed. To
trace ISDN connection status when making ISDN
connections, open status.exe at the system32
subdirectory (e.g., c:\winnt\system32\status.exe).
To change the I/O, IRQ, Mem, Pcmcia, Switch
Type, ISDN phone number (required in RVS-
COM), click My Computer è Control Panel è
Network, then open the Adapters tab. Scroll down
the Device list to select the device name. Click
Properties to change parameters. After making any
setting changes, reboot the NT system.