User`s guide

Page 101
9.5.3 Common values for modem transmission
This screen is displayed for an operator using a modem connection.
GSM2504 Network operators 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Network ID . . . . . . . . . . 240-01
Network name . . . . . . . . . Telia Mobitel GSM Text
Protocol . . . . . . . . . . . UCP_
International prefix . . . . . 009
Send delay in seconds . . . . 2 0-99
Login prompt . . . . . . . . . *NONE_______________
Response text delivered . . . 1_____________________________
Starting position text . . . 1 0-20
Response text failed . . . . . 2_____________________________
Starting position text . . . 1 0-20
Response text stored . . . . . 3_____________________________
Starting position text . . . 1 0-20
F12=Cancel
Common values for modem transmission
Protocol
Message encoding protocol. MidJet GSM Text supports the following
protocols:
UCP Universal Computer Protocol.
UCPP Universal Computer Protocol implemented for pagers.
CIMD Computer Interface to Message Distribution.
TAP Telelocator Alphanumeric Protocol.
Send delay in seconds
This field specifies the number of seconds the system waits before first
message is sent after a connection is established.
Login prompt
Login prompt from the remote system.
Response text delivered
Response text returned by the GSM operator upon successful delivery.
Starting position text
If specified the response text is searched for in the specified position. Else,
the entire text is searched.
Response text failed
Works according to response text delivered.
Response text stored
Works according to response text delivered.