User`s guide

Page 112
9.7.2 Configuration status
This screen is displayed after selecting a CFGSTS checkpoint for update or
add.
GSM280A Monitor system operations 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Checkpoint type . . . . . . . *CFGSTS
Description . . . . . . . . . X.25 line_____________________
Schedule number . . . . . . . 1 F4=List
Operational message receiver . *SYS______
Check cycles bypass value . . 5
Configuration object name . . X25LIN____ Configuration object type *LIND_____
Mark valid status codes with 1.
VARIED OFF _ ACTIVE READER _ FAILED _
VARY OFF PENDING _ ACTIVE WRITER _ FAILED READER _
VARY ON PENDING _ HELD _ FAILED WRITER _
VARIED ON 1 POWERED OFF _ DIAGNOSTIC MODE _
CONNECT PENDING 1 RCYPND _ DAMAGED _
SIGNON DISPLAY _ RCYCNL _ LOCKED _
ACTIVE 1 SYSTEM REQUEST _ UNKNOWN _
F12=Cancel
Configuration status checkpoint
Checkpoint Description
Descriptive text of the checkpoint.
Schedule number
Number of the schedule that controls when this checkpoint will run.
Operational message receiver
Name of the user or distribution group that shall receive messages created
by this checkpoint. Value *SYS directs those messages to the user specified
when using the main menu item 10 for this system.
Check cycle bypass value
This field controls if the checkpoint shall run every time the monitor
operations program runs. In order to save system resources it might be
desirable to bypass some check cycles. The value controls how many cycles
in a row to be bypassed before the checkpoint is run again.
For the *CFGSTS checkpoint the default value is 5, the checkpoint bypasses
five cycles before it runs the next time.
Checkpoint configuration object type
*LIND The configuration object to be checked is a line description.
*CTLD The configuration object to be checked is a controller description.
*DEVD The configuration object to be checked is a device description.
*NWI The configuration object to be checked is a network interface.
Valid status codes
Mark with ’1’ status codes that should be considered as valid.