User`s guide

Page 119
9.7.8 Filter entry details
This screen is displayed after selecting a filter entry for change, or after
pressing F6, Create.
GSM2822 Message filter 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Message ID . . . . . . . . . . CPF1234
Job name . . . . . . . . . . . *ANY
User ID . . . . . . . . . . . *ANY
Message data . . . . . . . . . *ANY
Selection code . . . . . . . . 0 0=Omit, 1=Include
Operational message receiver . *SYS
F3=Exit
Filter entry details
Message ID
The message ID of the message to process with this filter entry. If *ANY is
specified, the message will be processed regardless of message ID. Specify
*NONE to select impromptu messages as they do not have a message id.
Job name
The job name of the message to process with this filter entry. If *ANY is
specified, the message will be processed regardless of job name.
User ID
The user ID of the message to process with this filter entry. If *ANY is
specified, the message will be processed regardless user ID.
Message data
This field holds the data to compare with the message data from the
message to process. If the message received is an impromptu message, all
text in the message is considered as message data. When the test is
performed the message data is used as base string for a scan. If this string
is found anywhere in the message data this filter entry is used if the other
conditions are met.
*NONE No scan is performed. The condition is always met.
String The data string to use for the scan.
Selection code
0 The message is omitted if the selection criteria is met
1 The message is included if the selection criteria is met
Operational message receiver
The user ID of the receiver for messages selected by this filter entry. Specify
*SYS if the currently appointed receiver of operational messages for this
system shall receive the message