User`s guide

Page 128
9.7.16 Server
This screen is displayed after selecting a Server checkpoint for update or
add.
GSM280D Monitor system operations 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Checkpoint type . . . . . . . *SERVER
Description . . . . . . . . . Server description
Schedule number . . . . . . . 1 F4=List
Operational message receiver . *SYS
Check cycles bypass value . . 10
Server name . . . . . . . . .
IP address . . . . . . . . . . 192.168.1.1
Port number . . . . . . . . . 1234
F12=Cancel
Server checkpoint
Checkpoint Description
Descriptive text of the checkpoint.
Schedule number
Number of the schedule that controls when this checkpoint will run.
Operational message receiver
Name of the user or distribution group that shall receive messages created
by this checkpoint. Value *SYS directs those messages to the user specified
when using the main menu item 10 for this system.
Check cycle bypass value
This field controls if the checkpoint shall run every time the monitor
operations program runs. In order to save system resources it might be
desirable to bypass some check cycles. The value controls how many cycles
in a row to be bypassed before the checkpoint is run again.
For the *SERVER checkpoint the default value is 10, the checkpoint
bypasses ten cycles before it runs the next time.
Server name
The name of the web server to monitor. Specify either server name or IP
address.
IP address
IP address to the server.
Port number
The port number of the server.