User`s guide

Page 130
9.7.18 Active systems
This screen is displayed after selecting a SYSACT checkpoint for update or
add.
GSM280B Monitor system operations 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Checkpoint type . . . . . . . *SYSACT
Description . . . . . . . . . All systems___________________
Schedule number . . . . . . . 1 F4=List
Operational message receiver . *SYS______
Check cycles bypass value . . 10
Send system active message . . 1
Send time system active msg . 6:00
F12=Cancel
System active checkpoint
Checkpoint Description
Descriptive text of the checkpoint.
Schedule number
Number of the schedule that controls when this checkpoint will run.
Operational message receiver
Name of the user or distribution group that shall receive messages created
by this checkpoint. Value *SYS directs those messages to the user specified
when using the main menu item 10 for this system.
Check cycle bypass value
This field controls if the checkpoint shall run every time the monitor
operations program runs. In order to save system resources it might be
desirable to bypass some check cycles. The value controls how many cycles
in a row to be bypassed before the checkpoint is run again.
For the *SYSACT checkpoint the default value is 10, the checkpoint
bypasses ten cycles before it runs the next time.
Send system active message
Use this field to specify if a message should indicate that the *SYSACT
checkpoint is completed.
0 indicates that no message shall be sent, 1 means that a message shall be
sent.
If active, one message is sent every 24 hours.
Send time system active message
Send time in HHMM format when the system active message shall be sent.
If the GSMTEXT subsystem is started later, the message will be sent then.