User`s guide

Page 15
field when the GSM module is connected to the iSeries via a communication
line.
IP address comm. server
Use this field when the GSM module is connected via a communication
server. Specify the IP address of the communication server. MidJet GSM
text supports servers from W&T, type numbers supported are W&T #58001,
#58004 and #58201.
Network ID
Specifies the number of the network of the SIM card. Press F4 to display a
list of networks.
SIM card PIN code
The PIN code is used to check authority to the GSM SIM card. It cannot be
altered with MidJet GSM Text, use in that case a mobile phone.
Module type
This field holds the type of the GSM module. The following types are
supported:
A1 Siemens A1
ETM9200 ETM 9200
ETM9300 ETM 9300
ETM9350 ETM 9350
GM12 Ericsson GM12
GM22 Ericsson GM22
M1 Siemens M1
TC35 Siemens TC35
TC35i Siemens TC35i
POCKETGSM Digicom PocketGSM
F12=Cancel
Leave the Quick install program without saving the entered values.
3.3 Register license code
Before you can use any function of the product a license code must be
entered. Use function key F23 to start the license code entry program.
See chapter 8 Main Menu for a description of how to use this program.
If you completed the Quick Install program go to section Installation
verification, else continue with Manual Installation.