User`s guide

Page 16
3.4 Manual installation
Use main menu option 20 to display the Configuration menu.
Then use:
 Option 1 to define/review general parameters.
 Option 3 to define/review systems, if in a multiple system environment.
 Option 4 to define/review communications parameters.
 Option 5 to define/review networks.
A detailed description how to use the options is found in chapter 9.
3.5 SSL Configuration
If you will use the TCP/IP connection to you network provider and use SSL
or send e-mail using SSL, follow these steps to enable SSL on your system.
The first step may already have been completed if you use SSL for other
purposes on your system.
 Run command STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
 Connect to the system with a browser on port 2001
 Click Digital Certificate manager.
 Click Create New Certificate Store.
 Follow the prompt to create a new *SYSTEM certificate store.
No certificate needs to be assigned or created for GSM Text.
Then go to a command line and run the following command:
CALL GSMTEXT/GSM880C
This will grant GSMTEXT user profile authority to the system certificate
store.
3.6 Installation verification
When installation is completed you are ready to verify the installation by
sending a message. To do this, return to the MidJet GSM Text Main Menu
and:
 Add an entry to the User File by using option 11.
 Start the MidJet GSM Text subsystem using option 21.
 Use option 1 to create a message.
If you have installed a GSM module, also check the radio signal quality.
From the main menu, select option 20 Configuration, then option 4
Communications descriptions. Place an 8 in front of the used configuration,
normally GSMT34, and press Enter. The Signal quality should be at least 10.
If lower consider moving or replacing the antenna.