Manualshelf

User`s guide

ManualsBrandsMultitech ManualsComputer equipmentMT1932ZDXI
11121314151617181920
Page 18
3.7 Upgrade Installation
Please observe that a new license code is required if upgrading from an
earlier version than 6.00.
The upgrade installation is very easy to perform. Just follow these steps:
Sign on as QSECOFR.
End the subsystem by running the command ENDGSMTSBS.
Make sure that MidJet GSM Text is not being used. This can be done
with the command: WRKOBJLCK GSMTEXT/USUSERP *FILE
The displayed list shall be empty. If not, end the jobs on the list before
proceeding with the installation.
Take a backup copy of the GSMTEXT library.
Place the new CD in the desired CD drive.
Run the command LODRUN (device name).
If a new license code is provided, also perform this step:
When the MidJet GSM Text main menu is displayed, select F23 and
enter the new license code.
The installation program automatically preserves the application data, and it
is ready to use as soon the MidJet GSM Text Menu is displayed.
If you are upgrading from version 3.xx or later the installation program will
automatically convert your files to new formats. It is recommended that you
verify the Communications and Network file entries before you use the
application the first time. Also change/verify the values in the configuration
menu option 10 if you want to use the new monitor operations options.
MidJet GSM Text should now be available for use. Start the subsystem
using menu option 21, and send a message using menu option 1 to verify
the upgrade.
3.8 Move installation to a new system
When you want to move the GSM Text installation from one system to
another, follow these steps. This procedure will retain all your data from the
old system.
On the old system – run Upgrade Installation of GSM Text if you have a
later version of the software available.
Save library GSMTEXT on the old system.
Sign on as QSECOFR on the new system.
Restore the GSMTEXT library.
Place the new GSMTEXT CD in the CD drive.
Run the command LODRUN (device name).
When the MidJet GSM Text main menu is displayed, select F23 and
enter the license code for the new system.