User`s guide

Page 21
4 Installation on the Win2000 or NT system
4.1 Prepare for initial installation
The installation of MidJet NT Monitor software will normally take less than 30
minutes.
The software itself is always delivered together with the MidJet GSM Text
software. When delivered on a CD, the same CD can be used for installation
both on the iSeries and the on NT system. The NT Monitor software is also
automatically loaded in a save file in the GSMTEXT library on the iSeries
when the MidJet GSM Text product in installed. The save file is then loaded
to a directory in IFS (Integrated File System). The MidJet NT Monitor
installation program can be used with either of these sources.
The configuration related files are delivered with as much information as
possible already entered, the only mandatory value that must be entered as
part of the installation is the IP address to the iSeries.
4.1.1 Installation pre-requisites
The following is needed:
 An iSeries computer with the MidJet GSM Text product installed.
 The PC with Microsoft Windows 2000 or NT 4.00 operating system which
is the target for the installation.
4.2 Initial installation procedure
Follow these steps:
 Sign on to the iSeries system as QSECOFR or another profile with
authority level 2 to the GSM Text product.
 Run the command STRGSMT.
 Verify that the Win2000/NT license code is entered on the iSeries by
pressing F23 from the main menu. The Win2000/NT license type must
allow the number of NT Monitor systems you intend to use. See section
Register license code in the Installation on the iSeries chapter for
additional information.
 Go to configuration menu option 3, and add the Win2000/NT system.
 Select option 20, Command codes, on the configuration menu. If this is
the first system you are installing the NT Monitor on, and then change the
Target system name on command codes ZC, ZD and ZR from blank to
the name of the Win2000/NT system. For the second and following
systems, copy these command codes for every Win2000/NT Monitor
system you add. Then change the target system name in the newly
created command codes.
 Restart the GSMTEXT subsystem. Use GSM Text Main menu options 22
and 21.
 Log in to the target Win2000/NT system as Administrator.