User`s guide

Page 22
 Use either the Installation from CD or Installation from IFS procedures
described below.
4.2.1 Installation from CD
 Place the MidJet GSM Text CD in the CD drive on your Win2000 or NT
system.
 Run d:gsmntm/setup where d is the letter of the CD drive.
 Follow the instructions on the screen.
4.2.2 Installation from IFS
This installation method assumes that you have Client Access or other
equivalent software installed.
 On the iSeries, run the configuration menu option 31. This menu option
is available once the NT license code is entered. This will load the NT
Monitor software to midjetinstall directory on the iSeries.
 On the Win/2000 or NT system, use Explorer and open the midjetinstall
directory located under the name of the iSeries.
 Double click on the setup.exe file.
 Follow the instructions on the screen.
4.3 Completing the installation
 Click on the ConfigTool icon on your desktop, or click the Start button,
Programs, ConfigTool.
 Click on TCP/IP Config and enter the TCP/IP address of the iSeries.
Important! Before you start to use the application, remove all old messages
from the Win2000/NT’s event log. If you don’t, a huge number of messages
could be sent to the operator’s GSM phone.
The MidJet Win2000/NT Monitor is implemented using a service program. It
is recommended to configure it to start automatically whenever the NT
system is started.
To do this, click on Start, Settings and then on Control panel. Then click on
Services, and select the MidJet Monitor service. Click on Configure and
change Start Method from Manual to Automatic and click OK.
Now start the service manually by clicking Start.
4.4 Installation verification
You are now ready to verify the installation by sending a message.
 Click on Send Message on the Win2000/NT’s desktop.