User`s guide

Page 45
8.3.5 Sent message details
This screen is displayed after selecting a sent message in a message log
screen.
GSM1302 Message log 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Sequence number . . 84 Creation date . . . 12-02-01
Status . . . . . . . Delivered Creation time . . . 12:00:00
To user ID . . . . . USERID Alarm send date . .
GSM number . . . . . 46708360259 Alarm send time . .
Send alarm call . . No
Reply number . . . . 7
Send date . . . . . 12-02-01 Reply . . . .
Send time . . . . . 12:00:07 Reply date . . . . .
From user ID . . . . GSMTEXT Reply time . . . . .
E-mail sent to . . . [e-mail] 12-02-01 12.00.02
Message text . . . . QDFTJOBD GSMTEXT 059152 DEMOERR 1800 tried to divide by
zero (factor 2) (C G S D F).
Network response . . +CMGS: 18 OK
F3=Exit F8=Reply F12=Cancel F13=Resend message
F23=Delete message
Sent Message Details
This screen holds the detailed information for each message.
The sequence number is assigned by the system creating the message.
The Status field could have the following values:
Sndq In send queue.
Sndq-rmt In send queue on a remote system.
Snd-rty Attempt to send message failed. Maximum three attempts will
be made, if still not successful the status is changed to Perm
error.
Stored Message accepted for transmission by the network.
Delivered The message is successfully delivered to the recipient.
Not avail The message could not be sent because there was no
configuration available to the network or mobile telephone
number.
Unknown The status of the message submission could not be determined.
Perm error Permanent error, message distribution failed, and no more
distribution attempts will be made.
The To user ID field holds the user id of the recipient if he is registered in
the user file. Messages sent directly to a GSM number are filed to User ID
*NONREG.
This screen also shows message creation, message send, and message
alarm date and time.