User`s guide

Page 51
8.4.1 Local system values
This screen is displayed after selecting a system for change.
GSM1402 Monitor operations options 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
System name . . . . . . . . . *LOCAL
System description . . . . . . Local system
System descript abbreviation .
Operational message receiver . *NONE_____
Send alarm call . . . . . . . 0 0=No, 1=Yes
F3=Exit F12=Cancel
Local system
Operational messages receiver
The ID of a user, or the ID of the distribution group that is currently assigned
to receive operational messages. Also valid value is *NONE.
Send alarm call
This field controls if the alarm call function is to be used. When used, a
normal telephone call will be made with a modem. The purpose of this is to
use the loud ring signal to make the operator in charge aware of a system
problem message.