User`s guide

Page 56
8.5.2 Advanced options
This screen is displayed after pressing F11 in the User details screen.
GSM1503 User maintenance 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
User ID . . . . . . . . . . . USERID
User name . . . . . . . . . . User Name
Phone display line length . .
Originator number . . . . . . ____________________
Exit command string . . . . . *SYS__________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
________________________________________________________________
User data . . . . . . . . . . ________________________________
F3=Exit F12=Cancel
Advanced options
Phone line length
Max number of characters on each line when the GSM telephone is used to
display short messages (SMS).
Originator number
The originator number is sent together with the message, and is shown on
the telephone display. This function is only supported by some GSM
operators.
If not specified here, the value entered in General configuration is used.
The value is used when this user creates a message.
Exit command string
Specify the command to be run when the exit command function is active. It
can be any valid user or system command. The following describes the
variables and values returned for the substitution parameters:
&U User id in the user file.
&M The text content of the message.
If the value is *SYS, the command string specified in General configuration,
Part 2 will be used.
User data
User data about the user can be stored here. This field is not processed by
the MidJet GSM Text application.