User`s guide

Page 70
9.1.3 Part 3
GSM2103 General 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Modem command translation from $#@_____________________________
Modem command translation to . ÅÄÖ_____________________________
Operations monitor interval . 15 Seconds
Enable group escalation . . . 0 0=No, 1=Inquiry msg, 2=All msg
Escalation delay time . . . . 15 Minutes
Max nbr of IP connect attempts 5
Incoming SMS validity period . 72 Hours
SMTP server . . . . . . . . . smtp.example.com_______________________________
________________
SMTP server port number . . . __465
Sender e-mail address . . . . [e-mail]_____________________________
________________
Use SSL . . . . . . . . . . . 1 0=No, 1=Yes
User id . . . . . . . . . . . userid_________________________________________
Password . . . . . . . . . . . password______________________
F12=Cancel
General Configuration part 3
Modem command translation from
Enter the national character string to be translated. It is used when sending
AT commands via an asynchronous modem.
Modem command translation to
The translated values of the characters.
Operations monitor interval
Interval in seconds between the system performs system monitor activity.
Specify a value between 10 and 9999 seconds. A value less than 10 will be
handled as 10.
Enable group escalation
This field controls if group escalation shall be active for system messages.
When active, an escalation message is created if a message is not
replied/acknowledged within a specified time. The escalation message is
sent to the next member in the distribution group.
0 Not active.
1 Active for inquiry messages
2 Active for all messages.
Escalation delay time
The number of minutes the system waits before creating an escalation
message.
Max nbr of IP connect attempts
The maximum number of connect attempts made to a remote system before
considered as unsuccessful. This value is used when the *SYSACT, *HTTP,
POP3, *SMTP or *SERVER checkpoint is testing the TCP/IP connection to a
remote system.
Incoming SMS validity period
Enter the number of hours the incoming SMS should be considered valid.