User`s guide

Page 91
9.4.5 GSM Module
This screen will be displayed if connection type 4 is selected.
GSM2406 Communication config descriptions 12-02-01 12.00.00
Ver 6.13 USERID SYSNAME
Type values and press Enter
Configuration name . . . . . . GSMT34
Configuration description . . Asynchronous GSM device
Configuration type . . . . . . 3
Connection type . . . . . . . 4
Resource name . . . . . . . . CMN01_____
Line speed . . . . . . . . . . 9600_
Number of data bits . . . . . 8
Parity . . . . . . . . . . . . 0
Number of stop bits . . . . . 1
Flow control . . . . . . . . . 0
Device type . . . . GM12______
SIM card PIN code . . . . . . 0000____
Network ID . . . . . . . . . . 240-07
Service center address to use 1 1=Sender, 2=Receiver
F12=Cancel
GSM module
Resource name
Specifies the hardware resource to be used. Use the command
WRKHDWRSC to determine the resource name.
Line speed
Specify 9600 for a GSM module.
Module type
The following GSM module types are supported:
A1 Siemens A1
ETM9200 ETM 9200
ETM9300 ETM 9300
ETM9350 ETM 9350
GM12 Ericsson GM12
GM22 Ericsson GM22
M1 Siemens M1
TC35 Siemens TC35
TC35i Siemens TC35i
POCKETGSM Digicom PocketGSM
SIM card PIN code
The PIN code is used to check authority to the SIM card. A PIN code is
assigned by the GSM operator. Place the SIM card in a mobile phone if you
want to change it.
Network ID
The ID of the GSM network that issued the SIM card used in the GSM
module. Press F4 to display a window with available networks.