Owner`s manual

25
3 - AT Commands, S-Registers and Result Codes
Command Options Function & Description
\Q3 RTS/CTS hardware flow control
\Tn Set inactive timer
n=0 *
Disable inactive timer
n=1 - 90
Enable inactive timer. Length in
minutes
\Vn Protocol result codes
\V0 * Disable protocol result code (e.g.
CONNECT 9600)
\V1 Enable protocol result code (e.g.
CONNECT 9600/LAP-M)
\Xn XON/XOFF pass-through options
\X0 * Process XON/XOFF per “AT\Gn” and
“AT\Qn” option, if XON/XOFF flow
control is enabled, do not pass XON/
XOFF to the remote modem or local
DTE
\X1 Process XON/XOFF per “AT\Gn” and
“AT\Qn” option, always pass XON/
XOFF to the remote modem or local
DTE
* Factory default setting