User guide

ManualsBrandsMultitech ManualsModemMT5600BA

MultiModemII

Data/Fax Modem

MT5600BA and MT5600BL Series

MT5600BA – V.92

MT5600BA – V.90

MT5600BL – V.90

Quick Start Guide

Summary of content (8 pages)

PAGE 1
MultiModemII Data/Fax Modem MT5600BA and MT5600BL Series MT5600BA – V.92 MT5600BA – V.90 MT5600BL – V.
PAGE 2
MultiModemII Quick Start Guide MultiModemII Quick Start Guide MT5600BA–V.92, MT5600BA–V.90, MT5600BL–V.90 P/N 82080254 Revision E Copyright © 2002-4 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc.
PAGE 3
MultiModemII Quick Start Guide Getting Started This Quick Start Guide will help you install and set up your modem. A User Guide containing detailed configuration information and a separate AT Commands reference guide can be found on the MultiModemII CD shipped with your modem. Safety Warnings • • • • • • • • Use this product only with UL- and CUL-listed computers (US). Never install phone wiring during a lightning storm.
PAGE 4
MultiModemII Quick Start Guide Connect the Modem to Your PC Plug one end of the serial cable into the RS-232 connector on the modem and plug the other end into a serial port connector on your computer, such as COM1 or COM2. Connect the Modem to the Telephone Line (Dialup Connection) Plug one end of the modular phone cable into the modem’s LINE jack, and the other end into a public switched telephone network (PSTN) wall jack. Important: The LINE jack and PHONE jack are not interchangeable.
PAGE 5
MultiModemII Quick Start Guide Power-On Test Test the modem by turning it on (a power switch is located on the front panel). When you turn it on, the modem performs a diagnostic self-test, indicated by the TM indicator lighting for a few seconds, after which the LCD should light. If this does not happen, check that the power switch is on, the transformer module supply is solidly connected, and the AC outlet is live.
PAGE 6
MultiModemII Quick Start Guide Step 3: Set Country or Region Code (MT5600BA-V.92 Only) The MT5600BA-V.92 is a global modem. However, countries or regions vary in their requirements for how a modem functions. Therefore, you must configure yours to match the defaults of the country or region in which you are using it.
PAGE 7
MultiModemII Quick Start Guide Using the Global Wizard to Configure Your Modem The Global Wizard configuration utility is recommended for computers running in Windows. 1. Insert the MultiModemII CD into the CD-ROM drive. The Autorun dialog box appears. 2. Click Initial Setup and Region Selection. The Global Wizard dialog box appears. Click Next. 3. The Global Wizard searches for your modem and identifies it. Click Next after your modem is identified. 4.
PAGE 8
Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365; 5,309,562; 5,301,274.