User guide

MultiModemII Quick Start Guide
Getting Started
This Quick Start Guide will help you install and set up your modem. A
User Guide containing detailed configuration information and a separate
AT Commands reference guide can be found on the MultiModemII CD
shipped with your modem.
Safety Warnings
• Use this product only with UL- and CUL-listed computers (US).
• Never install phone wiring during a lightning storm.
• Never install a phone jack in a wet location unless the jack is
specifically designed for wet locations.
• Never touch uninsulated phone wires or terminals unless the phone
line has been disconnected at the network interface.
• Use caution when installing or modifying phone lines.
• Avoid using a phone during an electrical storm; there is a risk of
electrical shock from lightning.
• Do not use a phone in the vicinity of a gas leak.
• To reduce the risk of fire, use only 26 AWG or larger telephone line
cord.
Modem Installation
Step 1: Connect the Modem to Your System
Turn off your computer. Placing the modem in a convenient location,
connect it to your computer’s serial port, to the telephone line, to your
leased line, to AC power, and, optionally, to your telephone.
VOLUME
EIA RS232C
LEASEDLINE
POWER
PHONE
or
MultiModemII connections with V.92 transformer. Also shown: V.90 transformer
1