User guide

Software
Loading Your ProxyServer Software
The ProxyServer Install Software and User Guide are provided on
the ProxyServer CD-ROM. The CD-ROM is auto-detectable and
should start automatically when inserted into your CD-ROM drive.
After you have configured your ProxyServer, you can install the
User Guide on your hard drive (for later viewing or printing) by
clicking the Install Manuals icon on the Installation CD screen and
selecting MTPSR1-202ST.
1. Before inserting the ProxyServer CD-ROM into your
CD-ROM drive, determine whether you will configure
your ProxyServer over the LAN or directly from a COM
port of a local PC. For configuring over a network, your
PC must first be configured for network communica-
tions (i.e., TCP/IP stack must be installed) and both the
PC and the ProxyServer must be on the same physical
LAN segment. If you need to load the TCP/IP stack,
refer to the Windows Client Setup chapter in the
ProxyServer User Guide.
2. Insert the ProxyServer CD-ROM into the CD-ROM
drive on your local PC. The CD-ROM should start
automatically; however, it may take 10 to 20 seconds
for the Multi-Tech Installation CD screen to appear.
13