Network Router User Manual

28
MultiFRAD 3000-Series User Guide
Introduction
This chapter describes the MultiFRAD 3000 software from an applications approach in how the
configuration can be changed with recommendations on the impact of that change. The major
configuration parameters were set during your loading of the software and downloading of your
configuration at the end of the software installation. The MultiFRAD 3000 software is designed for the
Microsoft ® Windows ® environment.
Recommendations are provided in some case that if you change this parameter or that parameter, it
may affect your unit in this way. The approach in this chapter is not to cover every dialog box and
describe every option, your new Help menu system provides that information. The Help menus
define each button, option, field, and recommend values where applicable. The Help menus are a
dynamic help system in that information is presented corresponding to the active dialog box. You do
not have to scan through unrelated information in order to find the Help menu you are looking for.
Before You Begin
Before you begin, lets cover a few procedural matters so that they are out of the way.
To view or change your MultiFRAD configuration in Windows95, click on the Start button, point to
Programs, then MultiFRAD 3000, and click on MultiFRAD Configuration. You may also start the
MultiFRAD Configuration from My Computer by selecting the MF3000 directory and double clicking
on the fradcon Application in the file list.