Network Router User Manual

32
MultiFRAD 3000-Series User Guide
IPX Setup
The IPX Setup dialog box controls the four frame types, the WAN ports setup, and the advanced tab
enables IPX routing, auto learn of Ethernet network numbers, and the distributed name of the
MultiFRAD.
The RIP and SAP default timers should not have to be changed for most applications. Disabling IPX
and SPX Watchdog Spoofing in the Bandwidth Optimization group has proven effective under certain
circumstances with Citrix clients.
The IPX WAN Setup dialog box allows you to enable or disable IPX routing on the WAN port, change
the network number for the WAN port, enable or disable NetBIOS, change the default RIP and SAP
timers, and optimize the bandwidth. If the WAN port is configured for frame relay, this dialog box
allows you to add logical WAN. How the logical IPX WAN ports are configured is controlled by the
WAN Port Setup dialog box.