Network Router User Manual

89
Glossary
Long Haul: The T1 element that connects to the Access portion of the long distance company's (LDC's) central office. The LDC is
commonly called the point of presence (POP). Each LDC has a number of POPs, located throughout the country. The LDC is also
called an IEC (Inter Exchange Carrier).
Long Haul Communications: The type of phone call reaching outside of a local exchange (LE).
M
Management Information Base (MIB): A database of network management information used by the Common Management Informa-
tion Protocol (CMIP) and the Simple Network Management Protocol (SNMP).
Megacom: An AT&T service with a normal WATS line (typically T1) between the customer premise and the AT&T serving class 4 CO
are the customer's responsibility.
MegaLink: BellSouth's leased T1 service.
Message: Associated with such terms as packet, frame, and segment. 1. In information theory, an ordered series of characters
intended to convey information. 2. An assembly of characters and sometimes control codes that is transferred as an entry from an
originator to one or more recipients.
Modem: A communications device that enables a computer to transmit information over a telephone line. It converts the computer's
digital signals into analog signals to send over a telephone line and converts them back to digital signals at the receiving end. Modems
can be internal and fit into an expansion slot, or external and connect to a serial port.
Multiplexer (Mux): 1. A device that takes several input signals and combines them into a single output signal in such a manner that
each of the input signals can be recovered. 2. A device capable of interleaving the events of two or more activities or capable of
distributing the events of an interleaved sequence to the respective activities. 3. Putting multiple signals on a single channel.
Multiprotocol: A device that can interoperate with devices utilizing different network protocols.
Multithreading: The ability of a software system to be able to handle more than one transaction concurrently. This is contrasted to the
case where a single transaction is accepted and completely processed before the next transaction processing is started.
N
Nailed Connection: A permanent or dedicated circuit of a previously switched circuit or circuits.
Nailed-up Circuit: A semipermanent circuit established through a circuit-switching facility for point-to-point connectivity.
NAK (Negative Acknowledgment): Communications code used to indicate that a message was not properly received, or that a
terminal does not wish to transmit. Contrast with ACK.
Network: A group of computers connected by cables or other means and using software that enables them to share equipment, such
as printers and disk drives to exchange information.
Node: Any point within a network which has been assigned an address.
O
Object-Orientated: A method for structuring programs as hierarchically organized classes describing the data and operations of objects
that may interact with other objects.
Office Channel Unit - Data Port (OCU-DP): The CO channel bank used as the interface between the customer's DSU and the
channel bank.
Off-hook: The condition of a device which has accessed a phone line (with or without using the line). In modem use, this is equivalent
to a telephone handset being picked up. Dialing and transmission are allowed, but incoming calls are not answered. Contrast "on-
hook".
Off Premise Extension (OPX): An extension or phone that terminates in a location other than that of the PBX. Commonly used to
provide a corporate member with an extension of the PBX at home.
Ones Density: the measure of the number of logical 1s on a T1 line compared to a given total number of bits on that line; used for
timing information in data recovery in AMI and B8ZS.
On-Hook: The condition of a device which has not accessed a phone line. In modem use, this is equivalent to a telephone handset that
has not been picked up. In other words, it can receive an incoming call. Contrast "off-hook".
Open Shortest Path First (OSPF): A hierarchical Interior Gateway Protocol (IGP) routing algorithm for IP that is a proposed standard
for Internet. OSPF incorporates least-cost routing, equal-cost routing, and load balancing.