Specifications

Chapter 3 – iSMS Basics and the Setup Wizard
MultiModem® iSMS Administrator’s Guide 28
Configuring the MultiModem iSMS Using the Wizard Setup
The Wizard Setup lets you conveniently enter the minimal setup requirements for a user based (web browser) Send SMS
environment. The information you enter here carries over to other windows that require similar information.
Note: For new units (units defaulted to factory settings), Received SMS is handled by the Receive API Polling feature. You
can use the Web Management interface to set up additional features and functions.
Opening the Wizard Setup Window
To open the Wizard Setup:
1. Log in.
2. Click Wizard Setup located under the menu bar.
3. In the LAN group, enter the desired LAN settings. Currently saved LAN settings are displayed.
● IP Address – Enter the new IP address the MultiModem iSMS needs to use.
● Subnet Mask – Enter the subnet mask value to be used.
● Default Gateway – Enter the IP address of your network's internet router or gateway.
● Primary DNS – Enter the IP address of your network’s primary DNS server.
● Secondary DNS – Enter a secondary DNS IP Address (if any).
● Save – Click Save.