Specifications

Chapter 4 – Using the MultiModem iSMS Web Interface
45 MultiModem® iSMS System Administrator’s Guide
SMS Services > International Number
Use this window to enable SMS messaging to international numbers. International numbers are identified according to
the number of digits.
Disable
International
Number
If Disable International Number is checked (this is the default), SMS messages can be sent to phone
numbers limited by the maximum allowed digits, as entered in the Maximum Digits field.
If Disable International Number is NOT checked, SMS messages can be sent to any phone number.
Maximum
Digits
Enter the number of digits you want to be allowed when Disable International Number is checked. The
default is 11 digits.
Save Click Save.
SMS Services > Users
Use this window to create a list of users who can have limited access to the MultiModem iSMS to send SMS messages and
monitor their associated outbox. The figure below includes an example entry called "JoeSmith".
Adding Users
1. To add a user, click Add The Add a New User window opens.
2. Enter information into fields marked with an asterisk, as described in the table that follows.
User Name Enter the user's name. Spaces are not allowed.
Password Enter a password for this user. Each user must have a unique password. You must enter a minimum of 5
characters.
3. After entering users, click Create. If you want to start over, click Cancel.
Deleting Users
After you add a user, the Delete checkbox is available.
To delete a user:
1. Click the Delete check box. A pop-up dialog box asks you to confirm the deleting of this user.
2. Click OK to permanently remove the selected user.