Datasheet

Reference only
ETP1N401A
16 / 17
7. Taping specification
7-1. Dimension of capacitors on tape
Vertical crimp taping type < Lead code : N4 >
Pitch of component 25.4mm / Lead spacing 10.0mm
Unit : mm
Item Code Dimensions Remarks
Pitch of component
P 25.42.0
Pitch of sprocket hole
P0 12.70.3
Lead spacing
F 10.01.0
Length from hole center to lead
P1 7.71.5
Body diameter
D
Please refer to [ Part number list ].
Deviation along tape, left or right
S 02.0
They include deviation by lead bend .
Carrier tape width
W 18.00.5
Position of sprocket hole
W1 9.00.5
Deviation of tape width direction
Lead distance between reference and
bottom planes
H0 18.0
Protrusion length
0.51.0
Diameter of sprocket hole
D0 4.00.1
Lead diameter
d 0.600.05
Total tape thickness
t1 0.60.3
They include hold down tape thickness.
Total thickness, tape and lead wire
t2 1.5 max.
Deviation across tape, front
h1
2.0 max.
Deviation across tape, rear
h2
Portion to cut in case of defect
L 11.0
Hold down tape width
W0 11.5 min.
Hold down tape position
W2 1.51.5
Coating extension on lead
e
Up to the end of crimp
Body thickness
T
Please refer to [ Part number list ].
2.0
0
0
1.0
