Printer/Fax/Scanner/Copier Operating Instructions MFX-1300/1700

EasyStart sof tware is already inst alled on your Muratec fax machine. It guides you
through the process of entering your machine s settings.
These settings you make here can always be changed later.
Getting st arted
Determine the following before you go any further:
1
The type of dialing your telephone system requires Choose either tone or
pulse (rot ary) dialing.
2
The name and fax number you want to appear on your faxes
Every fax p age you send arrives at the receiving machine with a single line of text
at the very top of the p age. This text list s a name, called the T ransmit Terminal
Identifier ( TTI ), and a fax number. The TTI cannot be longer than 22 characters .
Clearing stored settings
Before using EasyStart, clear your machine s built-in user dat a memory. This ensures
the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an autho -
rized technician asks you to do so.
To clear the machine s memory:
1
Press Program key, *, 2 .The
LCD now asks if you want to clear the memory:
Note: If you don t want to clear the memory, just press
CANCEL .
2
If you do want to clear the memory, press ENTER .
Entering initial settings
Important: If you press STO P during EasyStart, your fax machine returns to standby
mode (it s normal condition). But it will keep the settings you saved by
pressing ENTER as described in these instructions.
1
Press Program key, I , ENTER .
The
LCD shows the current language setting.
2
Press or until the language you want appears.
3
Press ENTER to save the setting and continue EasyStart.
4
The LCD now shows the current calendar/clock setting, with a cursor appearing
under the first digit.
5
Use the numeric keypad to enter the correct date and time, using a MMDDYY format
for the date and 24-hour format for the time. For inst ance, to set 8:30
PM on June
11, 2002, press 0 6 1 1 0 2 2 0 3 0, which result s in:
Note: Y our fax machine automatically insert s the sp aces and date-slash. All you
have to do is enter the digit s.
To change a digit, press to move the cursor lef t, or to move it right.
Then enter the correct digit.
6
Press ENTER to save the clock setting and continue.
Enter Time
06/11 ’02 20:30
Enter Time
0
1/01 ’01 00:00
Language :English

/

/Enter
Clear User Settings
Check Enter/Cancel
EasyStart (Initial settings )
1.18
Getting st arted