Printer/Fax/Scanner/Copier Operating Instructions MFX-1300/1700

2.12
Basic operation
Your machine s copier features
Your machine has the following copier features:
Single copy (see the right column on this p age)
Stacking multiple copies (see p age 2.13)
Sorting multiple copies (see p age 2.13)
Enlarged or reduced copies (see page 2.13)
Negative/positive copy (Reverse black and white areas) (see page 2.17)
Combine copy (only for MFX-1700) (see page 2.17)
Ultra copy mode (only for MFX-1700) (see page 2.18)
Basic copy procedure
1
Press COPY / FA X to change to
Copy mode.
When the machine is in the Copy mode, the LCD shows:
Note: For details about each item, see Making copy settings, p ages 2.15 2.16
2
Place your original document in ADF face up , or on the FBS glass face down just
as you would to send a fax.
3
Enter the document size by pressing the DOCUMENT SIZE .
4
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
Set copy reduction or enlargement ratio
Note: For details about each item, see Making copy settings, p ages
2.15 2.16.
5
Press START .
Note: To reset the copy p arameter to default setting, press COPY RESET .
Note: To stop the copying, press STO P .
Single copy
1
Press COPY / FA X to change to Copy mode.
2
Place your original document in ADF face up , or on the FBS glass face down just
as you would to send a fax.
3
If you are using FBS glass, enter the document size by pressing the
DOCUMENT SIZE .
4
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: If you want to enlarge copy, use the FBS glass.
5
Press START .
Number of copies
Copy reduction or enlargement ratio
Recording paper size
Document size
COPY/FAX key
Making copies