Printer/Fax/Scanner/Copier Operating Instructions MFX-1300/1700

Advanced features
13
Press ENTER . The LCD asks if you want to turn the Fax & Copy feature on or of f for
this programmable one-touch number.
14
Press until the mode you want appears.
15
Press ENTER .
16
Press STO P to return your machine to st andby mode.
Programming printouts
To program a programmable one-touch key to print a list:
1
Press Program key, A , 3, 0, 1, ENTER .The LCD shows the first empty programma-
ble one-touch number available:
Note: If P 2 appears on the LCD , it means that you have already entered a num -
ber for P 1 . You can see what you programmed into P 1 by pressing , if
you want. For example, if you set P 1 for printing a list of the machine set -
tings, you will see:
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see p age 3.48.
2
Press the key that you want to program or change. Here, we ve selected P 2 .
Note: If your previous command for this key was for printing a list and you want
to keep this key programmed for printing a list, use these instructions to
make changes. But if you want to assign this key to a completely dif ferent
operation (for a delayed transmission, for example), then you first must
erase the stored command before programming the new one.
3
If you want to select a dif ferent programmable one-touch key than the one that
appears on the LCD , press that key now.
4
Press ENTER .The LCD asks which operation you want to program into the pro -
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5
Press until List Print appears.
Type :List Print

/

/Enter
Type :Communication

/

/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Machine Settings
Select Program No.
P2:No Number Stored
Fax & Copy :---

/

/Enter
3.45