Technical data

15
LU940407
6. Mai 1992 @ 12:49 Uhr
FOOTSWITCHES / "SONGS"
FOOTSWITCHES / "SONGS"
Main menu:
12 34567 8
View of the front:
How to progra
m SONGS:
1 Choose a SONG
2 Choose a STEP
3 Choose a PROGRAM or
4 press the "STORE" key to set it to "--EMPTY--"!
F1
EXIT
F4
F3
F2
STORE
MENU
SELECT
FUNCTIONS
Choose a PROGRAM
Choose a SONG (+1)
Choose a STEP (+1)
Choose a SONG (-1)
Choose a STEP (-1)
Choose a PROGRAM
4 How to program a "SONG"
To program a "SONG" you have to enter the SONGS/FOOTSW. menu.
To jump into the menu, you have to press the CURSOR key [ ] once.
The CURSOR key [ ] counts the PROGRAM NUMBER up,
the CURSOR key [ ] counts the PROGRAM NUMBER down.
"STEPS" which are not be used must be set to (—EMPTY—).
To do this simply press the "STORE" key. It toggles between the PROGRAM
NUMBER and (—EMPTY—).
If there are "STEPS" set to (—EMPTY— ) they will be ignored in the "PLAY" mode.
If all "STEPS" in a "SONG" are set to (—EMPTY—) the "SONG" will be ignored in
the "PLAY" mode.
Naturally it is possible that different "STEPS" contain the same PROGRAM
NUMBER
If you select a "SONG" it will start with the first "STEP 1".
If the first "STEP" is set to (--EMPTY--) you will get the next possible "STEP" .
After selecting "STEPS" or "SONGS" the DISPLAY shows the actual "SONG" and
"STEP" number, together with the title of the relevant PROGRAM for approx. 1
second.
Then the DISPLAY will show the PROGRAM (1-128) number and TITLE once more.
("PLAY" mode).
Note: Only using the"EXIT" key to leave the menu will store the changes into the
internal memory. If you switch the MS-8 off
before pressing the "EXIT" key
the MS-8 can not write into the internal memory and the data is lost.
In this menu it is possible to give all PROGRAMS (1-128) their own individual
names.