Technical data

17
LU940407
6. Mai 1992 @ 12:49 Uhr
"HELLO" message / sign your MS-8
Title / "HELLO" message
Main menu:
In this menu you can program any message or information up to 16 character.
The "HELLO" message appears after the unit has been on for approx. 2 seconds.
The CURSOR key [ ] scrolls up through all possible characters.
The CURSOR key [ ] scrolls down through all possible characters.
If you hold one of the CURSOR keys [ ] or [ ] down characters will scroll up or
down.
The CURSOR key [ ] changes the position of the underline to the left.
The CURSOR key [ ] changes the position of the underline to the right.
Easy programming with the function keys (F1-F4) :
- F1 = deletes a character
- F2 = inserts a character
- F3 = deletes all character
- F4 = restores the stored name / UNDO-function
You can use the following character:
Capital-character: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Small-character: abcdefghijklmnopqrstuvwxyz
Numbers: 0123456789
Other character: -+*/=!()#.
Note: Only using the"EXIT" key to leave the menu will store the changes into the
internal memory. If you switch the MS-8 off
before pressing the "EXIT" key the
MS-8 can not write into the internal memory and the data is lost.
In the F-AMP OUT menu you can setup the MS-8 to match your Fender
TM
amp
(= F-amp), new generation.
You only can use F-AMPS which using one MONO cable.