Technical data

LU940407

6. Mai 1992 @ 12:49 Uhr

MIDI

Main menu:

Incoming MIDI

PROGRAM

CHANGES ....

.... will be

changed by the

MS-8 to the

desired

PROGRAMS

(1-128)

2 MIDI MAPPING programming

To select the MIDI RECEIVE CHANNEL you have to go to the "MIDI SETUP" menu.

(From the "PLAY" menu: Press the CURSOR key [ ] once.)

To jump into the MIDI IN menu also press the CURSOR key [ ] once.

To enter the MIDI IN PRG. menu press the CURSOR key [ ] once.

With this table you can redirect MIDI PROGRAM CHANGE data.

E.g.: If any MIDI device sends out a MIDI PROGRAM CHANGE 12 the MS-8 will

change to any other PROGRAM (1-128) which is programmed instead of

PROGRAM 12.

Different MIDI PROGRAM CHANGES can use the same PROGRAMS!

The display above the CURSOR can be changed with the CURSOR keys [ ] and

[ ].

If you hold down one of the CURSOR key [ ] or [ ] for a longer time the PROGRAMS

(1-128) will automatically scroll up or down.

Easy programming with the functionkeys (F1-F4) :

- F1 = Counts the MIDI IN PROGRAM CHANGE up

- F2 = Counts the MIDI IN PROGRAM CHANGE down

- F3 = Counts the PROGRAM (1-128) of the MS-8 up

- F4 = Counts the PROGRAM (1-128) of the MS-8 down

Note: Only using the"EXIT" key to leave the menu will store the changes into the

internal memory. If you switch the MS-8 off

before pressing the "EXIT" key the

MS-8 can not write into the internal memory and the data is lost.