Technical data

22
LU940407
6. Mai 1992 @ 12:49 Uhr
MIDI
After using the CURSOR key [ ] (YES) all changed parameter for MIDI
will be set to the FACTORY PRESETS.
MS-8:
MIDI OUT #1 = CHANNEL 1
MIDI OUT #2 = CHANNEL 2
MIDI OUT #3 = OFF
MIDI OUT #4 = CHANNEL 4
MIDI OUT #5 = CHANNEL
16
MIDI OUT
MIDI PRG.-
CHANGE 67
TRANSMIT
CHAN. = 1
MIDI PRG.-
CHANGE 5
TRANSMIT
CHAN. = 2
MIDI PRG.-
CHANGE 8
TRANSMIT
CHAN. = 4
MIDI PRG.-
CHANGE 32
TRANSMIT
CHAN.=OFF
You can transmit a MIDI PROGRAM CHANGE change only if at least
one MIDI OUT #1 - #5 is set to "ON".
In this diagram MIDI OUT #3 is set to "OFF". You can not send the MIDI
PROGRAM CHANGE to this MIDI CHANNEL.
MIDI PRG.-
CHANGE 17
TRANSMIT
CHAN. = 16
3 MIDI OUT - TRANSMIT CHANNELS
To set the numbers of MIDI TRANSMIT CHANNELS you have to go to the "MIDI
SETUP" menu.
(From the "PLAY" menu: Press the CURSOR key [ ] once.)
To jump into the MIDI IN menu also press the CURSOR key [ ] once.
To enter the MIDI OUT menu press the CURSOR key [ ] three times.
You can use up to five different MIDI TRANSMIT CHANNELS to control the
connected MIDI devices. If you uses less than five MIDI devices switch the unused
MIDI TRANSMIT CHANNELS to "OFF".
The "OFF" function is located between TRANSMIT CHN. 16 and 1.
The underlined value can be changed by using one of the CURSOR keys [ ] or [ ].
If you hold down one of the CURSOR key [ ] or [ ] for a longer time the change of
the character will automatically scroll up or down.
Easy programming with the function keys (F1-F4) :
- F1 = Counts a MIDI OUT NUMBER up
- F2 = Counts a MIDI OUT NUMBER down
- F3 = Counts a MIDI TRANSMITCHANNEL NUMBER up
- F4 = Counts a MIDI TRANSMITCHANNEL NUMBER down
Note: Only using the"EXIT" key to leave the menu will store the changes into the
internal memory. If you switch the MS-8 off
before pressing the "EXIT" key the
MS-8 can not write into the internal memory and the data is lost.
4 MIDI initialise - MIDI setup !
With this menu you can reset all changed MIDI data back to the factory setup.
You have to go to the "MIDI SETUP" menu.
(From the "PLAY" menu: Press the CURSOR key [ ] once.)
To jump into the MIDI IN menu press the CURSOR key [ ] once. To enter the MIDI
SETUP! menu press the CURSOR key [ ] once. The Display shows:
MIDI SETUP ! / ARE YOU SURE ?
If you press the CURSOR key [ ] / YES the initialise will be actioned. All previous
changed data will be overwritten with the "FACTORY SETUP" data.
Main menu: