Technical data

23
LU940407
6. Mai 1992 @ 12:49 Uhr
F-Amp "older Generation"
In the position "RED PLAIN" you can switch the two functions
1- CHANNEL SELECT
2- REVERB
of a F-AMP "Old generation" WITH THE MS-8 SWITCHES (1+2)
View of the rear
MIDI / F-AMP "Older generation"
1 How to connect an older F-AMP
You can recognize these kind of amps by using the F-AMP list "Older generation"
or by having a closer look at the footswitch. The footswitch uses two rectangular
stereo standard plugs. One is marked with a red label the other is plain (chrome).
The footswitch itself contains two switches and two LEDS (red / green).
To setup the MS-8 set the slide switch "NORM. - RED PLAIN" located at the rear
of the MS-8 to position "RED PLAIN".
With two stereo cables you connect the MS-8 jack "SWITCHES (1+2) to the F-AMP.
Important: Set the two SWITCHES (1+2) to NEG. SWITCH.
(In the SWITCH/ F-AMP menu)
2 F-Amp list "Old generation".
Footswitch with 2 stereoplugs.
One marked "RED" the other is "PLAIN" (without mark).
Release June 1991.
FENDER SUPER CHAMP
FENDER CONCERT
FENDER 75 TOP
FENDER 75 COMBO
FENDER PRINCETON REVERB II
FENDER DELUXE REVERB II
FENDER TWIN REVERB II
FENDER 140 HEAD