Technical data

26
LU940407
6. Mai 1992 @ 12:49 Uhr
Information
1 Overview of the programmable data
Mainly you can make two kinds of programming:
- Global changes , for all PROGRAMS (1-128).
- Local changes, only for each PROGRAMS (1-128)
1.1 List of the global data
WRITE PROTECT : Set it to: OFF, ALL, or MEMORY.
SONGS : Assign the PROGRAM (1-128) to "STEPS".
FOOTSW. : Select the SWITCH modes (latch / momentary).
F-AMP : Select a F-AMP type
"HELLO" Message : Program any character (Your name, a message, etc.)
MIDI SETUP : Configure the MIDI RECEIVE and TRANSMIT CHANNELS
Select the MIDI OUT (#1-#5) and configure the MIDIMAPPING
Note: Only using the"EXIT" key to leave the menu will store the changes
into the internal memory. If you switches the MS-8 off before pressing
the "EXIT" key the MS-8 can not write it into the internal memory and
the data is getting lost.
1.2 List of the local data - for each PROGRAM (1-128)
SWITCHES 1 - 8 : SWITCHING of the relays.
TITLE EDIT : name / title
F-AMP OUT : switching functions of the F-AMP.
MIDI OUT : The (max. 5) MIDI PROGRAM CHANGES
You always have to store local changes with the "STORE" key!
"PLAY" / "EDIT" mode:
F1 = Footswitch Nº.1
F2 = Footswitch Nº.2
F3 = Footswitch Nº.3
F4 = Footswitch Nº.4
TITLE EDIT / "HELLO" message:
F1 = deletes one left character
F2 = inserts one character
F3 = deletes all characters
F4 = restores all programmed
character
WRITE PROTECT:
F1 = switches to OFF
F2 = switches to MEMORY
F3 = switches to ALL
F4 = no function
SWITCH:
F1 = POS. SWITCH
F2 = NEG. SWITCH
F3 = POS. PULSE
F4 = NEG. PULSE
F-AMP OUT:
F1 = CHN.1 / 2 / BOOST
F2 = CH. ON / OFF
F3 = no function
F4 = REV. ON /OFF
MIDI OUT PROG:
F1 = MIDI OUT #1 - #5
F2 = MIDI OUT #5 - #1
F3 = PRG.CHNG. OFF, 1 - 128
F4 = PRG.CHNG. OFF, 128 - 1
SONGS:
F1 = "SONG" 1- 100
F2 = "SONG" 100 - 1
F3 = "STEP" 1 - 8
F4 = "STEP" 8 - 1
FOOTSW:
F1 = next FTSW. function
F2 = previous FTSW. function
F3 = next value of the function
F4 = previous value of the function
MIDI SETUP:
F1 = OMNI
F2 = OFF
F3 = no function
F4 = no function
MIDI MAPPING:
F1 = MIDI IN PRG. +1
F2 = MIDI IN PRG. -1
F3 = PROGRAM +1
F4 = PROGRAM -1
MIDI OUT and TRANSMIT CHANNEL:
F1 = MIDI OUT #1 - #5
F2 = MIDI OUT #5 - #1
F3 = TRANSMIT CHN. +1
F4 = TRANSMIT CHN. -1
1.3 Overview of the functionkeys (F1 - F4)