Technical data

8
LU940407
6. Mai 1992 @ 12:49 Uhr
Internal memory
This is your last chance to leave the store process. You interupt it if you
press the "EXIT" key!
If you press the "STORE" key twice the actual program (Number after
"STORE") will be stored to the desired PROGRAM NUMBER (Number
after "TO"). This program can be changed to another location if you
change it with one of the CURSOR keys [
] or [ ].
After pressing the "STORE" key the LEDS "SWITCHES 1-8" are flashing
and the display shows: (E.g.) "STORE 1 TO 1"
1 "STORE" PROGRAMS (1-128)
If you change anything on a "PLAY" PROGRAM (1-128) the DISPLAY will change
from "PLAY" to "EDIT".
If the message "WRITE PROTECT" appears on the display instead of "EDIT"
you can not overwrite the data.
This is the memory protection feature. If you want to make any changes you have to
change the "WRITE PROTECT" to OFF. See also chapter "MEMORY PROTECTION".
If you want to store a PROGRAM (1-128) you have to press the "STORE" key once.
Now the LED of the key "SWITCHES 1-8" are flashing and the display shows:
If you want to move the actual PROGRAM (1-128) to another, you have to press one
of the keys [ ] or [ ] until you reached the desired PROGRAM NUMBER.
A second press on the "STORE" key finally stores the PROGRAM.
You can immediately interupt the "STORE" process by pressing the "EXIT" key.
2 "COPY" PROGRAMS (1-128)
To copy a PROGRAM (1-128) to another location you have to press the "STORE"
key once. Now the LEDS of the keys "SWITCHES 1-8" are flashing.
To move the actual PROGRAM (1-128) to the desired PROGRAM (1-128), you have
to press the one of the [ ] or [ ] keys until you reached the desired PROGRAM
NUMBER.
A second press on the "STORE" key stores the PROGRAM (1-128). The LED are
stop flashing.
You can immediately stop the store process by pressing the "EXIT" key.
The display shows "EDIT" if you change anything on the actual program!