Dimensions Guide

Sectional View
5
1
/
2
"
4
1
/
2
"
SUB-FLOOR
2
1
/
2
"
THRESHOLD
1
"
DRYWALL
1
/
8
"
GAP
5
"
2 x 4
STUD
WALL
SQUARE OPENING
THRESHOLD
A
B
D
C
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
DURABASE
®
Fiberglass Shower Floors
Square, Single Threshold
Design features:
 Sturdy, 1-piece molded fiberglass construction — ribbed underbody for
extra strength, slip resistant Starburst® surface
 Integral molded drain with seal for connection to 2” Sch. #40 ABS, PVC
or iron DWV sanitary drain pipe. See optional drain seals for 1-1/2” pipe
and 2” copper — removable strainer
 Available in White, Biscuit and Bone (see chart below)
 Semi-gloss surface — resistant to mold and mildew, easy to clean
 Designed to be used with Mustee’s DURAWALL
®
shower walls, ceramic
tile or preformed wall kit
General: Furnish and install as shown on
plans. DURABASE® square, single threshold
shower floor model _________ as manufactured
by E.L. Mustee & Sons, Inc. Floor to be one-
piece, molded fiberglass, made with matched
metal molds. Surface to be slip-resistant
Starburst® design that does not interfere with
the flow of water. Size ____” x ____”. Shoulder
will be no less than 3” high or less than 1” wide.
Tiling flange will extend not less than 1” higher
than the threshold which provides an integral
molded water barrier. Threshold will be not less
than 4 ½” high. Molded-in drain and drain seal
for installation of 2” iron DWV (Sch. 40) PVC or
ABS sanitary drain pipe. Removable strainer.
Shall meet ANSI Z 124-2011. Color: _______
(White, Bone, Biscuit)
Code Accepted
 International Association of Plumbing and Mechanical Officials® (IAPMO®)
 Warnock Hersey® (Canada) Listed – CSA test standards Shower Floor
 American National Standards Institute (ANSI) - Specification ANSI Z 124-2011
 American Society of Testing and Materials (ASTM) – D.635, E-84 and E-162
 CAN/ULC S102-07 Burn and Smoke Test
Specifications
SEE PAGES 2-3 FOR A LIST OF ACCESSORIES!
Model Nom. Size Color UPC A B C D
3232M 32” x 32” White 6 71031 00078 1 32” 32” 16” 16”
3232BN 32” x 32” Bone 6 71031 00075 0 32” 32” 16” 16”
3434M 34” x 34” White 6 71031 00101 6 34” 34” 17” 17”
3636M 36” x 36” White 6 71031 00148 1 36” 36” 18” 18”
3636BN 36” x 36” Bone 6 71031 00136 8 36” 36” 18” 18”
3636BT 36” x 36” Biscuit 6 71031 00350 8 36” 36” 18” 18”
4242M 42” x 42” White 6 71031 00334 8 42” 42” 21” 21”