Specification

A
12
"
B
Smooth finish
CareGiver
®
Model 390 Series
1-½” Inside Corner-Style Safety Grab Bars
Specifications:
General: Furnish and install as shown on plans, Inside Corner-Style Safety Grab Bar model
_____, as provided by E.L. Mustee & Sons, Inc. measuring ___x___ with Twist-Lock concealed
flange shall be 1-½” diameter, 18 gauge, type 304 stainless steel tubing. 14 gauge stainless
steel mounting flange shall be Heliarc welded to the tube to form a single structural unit. Grab
bar shall comply with applicable building codes. Meets ANSI A117.1
Model No. AxB UPC
390.304 34" x 18" 6 71031 00000 0
390.303 42" x 20" 6 71031 00000 0
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
Code Accepted
CareGiver® Grab Bars meet or exceed performance requirements:
American National Standards Institute (ANSI) A117.1 
Meets or exceeds HUD, FHA, VA, ADA and other Federal/local codes 
Design features:
Smooth stainless steel, 18 gauge tubing, satin nish, 1-½” diameter 
Exclusive, Twist-Lock concealed ange snaps into place for a secure, 
tamper-proof mounting
Stainless steel mounting ange is Heliarc welded to the tube to form a 
single, high strength structural unit that cannot be separated
All bars have a nominal offset distance of 1-½” (38mm) 
Flat contact surface won’t cut or mar wall surfaces – bar remains 
stable without further tightening
304 Stainless steel mounting ange, 14 gauge 
Tested to withstand 500 lbs. of downward load...when properly installed 