Owner`s manual

- 115 -

MAINTENANCE 6

6.4.1. Topping up the engine oil level

To top up the engine oil level, remove the oil filler

plug by using the 10 mm hexagonal bar supplied,

assembled on a proper key (see figure). Pour an

appropriate amount of engine oil of the recom-

mended type (see § 6.3). Never exceed the MAX

level mark. At the end of the operation, place back

the oil filler plug.

WARNING

Before reassembling the oil filler plug,

grease its O-Ring by using AGIP Grease

30.

At last, perform the tightening of the oil

filler plug at the tightening torque of 35

Nm, by using a dynamometric key.

Oil filler plug

CAUTION

To avoid clutch sliding and damage to

the engine, never add chemical addi-

tives to the engine oil, nor use an engine

oil different from the one specified in the

table at § 6.3. Make sure that no foreign

body gets in the crankcase while top-

ping up the engine oil.