Owner`s manual

- 148 -
MAINTENANCE 6
6
6.16.3. Replacing the high beam bulb
Remove the headlight from its support as described
in paragraph 6.16.2.
Extract the high beam bulb by rotating it counter-
clockwise.
Detach the connector from the burnt-out bulb.
CAUTION: Do not touch the bulb glass with
bare hands. If you do, clean the bulb with an
oil-free solvent.
Insert the connector in the new bulb.
Insert and lock the bulb holder in place by rotating
clockwise.
Replace the headlight on its support, following the
instructions described in paragraph 6.16.2.