Owner`s manual

- 51 -
CONTROLS AND INSTRUMENTS 3
3
High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the
function is inactive.
Low/high beam button
Under normal conditions, the low beam is on. The high beam can be switched on by pressing the but-
ton when allowed by the traffic and road conditions.
Turn indicator switch
It is used to show the rider’s intention to change direction or lane.
WARNING
Always use your turn indicators correctly. Use them to signal your attention before you
start a turn, and stop them when you have completed the turn. Failure to observe this warn-
ing could lead other users of the road to draw incorrect conclusions about your intentions
and the motion of your motorcycle. This could lead to a collision, with subsequent serious
injury or even death.
Horn button
It is used to attract the attention of other road users in case of danger.
Clutch lever
It engages/disengages the clutch through a hydraulically controlled device.