Owner`s manual

- 73 -

OPERATION 4

4.4.3. Resetting the trip mileage counters

The TRIP 1 and TRIP 2 counters can be reset as fol-

lows:

WARNING

The operation must be performed while the

engine is running, the gears are in neutral, the

motorcycle is stationary, and with the feet on

the ground. Do not set the display functions

while riding as it may cause loss of control,

upset, and subsequent serious injury or even

death.

Select the TRIP 1 function by pressing the engine

start button.

Press the button for longer than four seconds. The

TRIP 1 mileage will start blinking.