Product Manual

•PlugintheACortheDCpowercable.
•Press

buttontoturnonunit.TheLEDdisplayonthecontrolpanelwillturnonand
 theinteriortemperatureisdisplayed.Pressthe

buttonfor3 secondstoswitchoff
 theunit.Thesystemhasamemorywhichrecordsyourlastsettingbeforeshutdown.
 Ifthepowersupplyiscutoffordisconnected,theunitwillswitchoffautomatically
 andoncethepowersupplyisrestoreditwillautomaticallyswitchbackon.
•Usethe

buttontoincreaseorthe

buttontodecreasethetemperature.
•Pressthe
buttonforTurbo modetoincreasethespeedofthecompressor.
 Thissettingcanbeusedwhenyouneedtocoolproductsfaster.
•Pressthe

button1 timetochangethetemperaturesettingbetweenthetwo
 compartments(onlyDualZoneunits)
•Pressthe

button2 timestoswitchbetween°F or °CforSingleZonemodels
 and3 timesforDualZonemodels.°For°Cwillbeshownatthedisplay.
 Thenpressthe

or
buttontochange.
•Pressthe

button1 more time(afterchange°For°C),toenterbattery protect voltage
 setting.Thenpressthe

or
buttontochooseHI,MEDorLOofprotectlevel.
Battery protect level:
On (12 V) Off (12 V) On (24 V) Off (24 V)
LO:
11.1 ± 0.3 10.1 ± 0.3 23.3 ± 0.3 21.5 ± 0.3
MED:
12.2 ± 0.3 11.4 ± 0.3 25.3 ± 0.3 24.1 ± 0.3
HI:
12.6 ± 0.3 11.8 ± 0.3 26.2 ± 0.3 24.6 ± 0.3
•Pressthe

button1 more time(afterbatteryprotectvoltagesetting),toenterBluetooth
 activation mode.Thenpressthe

or
buttontochooseONorOFF.(See more on page 6)
•Pressthe

and

buttonfor3 seconds,atthesametimetoentertheBluetooth mode.
 CLO:ConnecttotherefrigeratorbyscantheQRcodeonly.
 OPE:ScanandndyourrefrigeratorbymobileBluetooth,andthenconnect.
•FortheDualZonemodels,pressthe

buttonfor3 seconds,andyoucanswitchoffthe
 coolingfunctionofthecompartmentontheleft.Alsopressthe buttonfor3 seconds,
 youcanswitchoffthecoolingfunctionofthecompartmentontheright.
 Pressagainfor3 secondstore-startrefrigerationincompartment.
Control Panel Single Zone
(CCP 36 / 44 / 60 / 73 / 105)
Control Panel Dual Zone
(CCP 69 / 96)
Temperature setting range –18 ºC to +10 ºC in each compartment
CCP Fridge•Freezer
LED Control Panels / Bluetooth Mode
page 4
Power Switch
Fault Light
Turbo Indicator Light
LED-Displays
Switch Compartments / Mode
Temperature Settings
Turbo Switch
Power Switch
Fault Light
Turbo Indicator Light
LED-Display
Mode
Temperature Settings
Turbo Switch