Instruction Manual Thank you for purchasing this product. This product has been made to high quality standards and is guaranteed for domestic use against manufacturing faults for a period of 12 months from date of purchase. For correct usage, read these instructions carefully.
Table of Contents 1.Safety Regulations 3 2.Product Composition 2.1 Component Name 2.2 Technical Parameter 5 8 3.Product Composition 3.1 Considerations 3.2 Rapid Operations 3.3 Mode Selection 3.4 Use of Water Permeable Rag 3.5 Roller Brush Assembly 9 9 10 13 15 16 4.Maintenance 4.1 Dust Box and Filter 4.2 Water Tank Assembly 4.3 Rolling Brush and Side Brushes 4.4 Other Assembly 17 17 18 19 20 5.Light Effect and Alarm Tips 5.1 Light Effect 5.2 Alarm Tips 21 21 22 6.
1.Safety Regulations When using the product, please keep your vigilance and follow below information. Please read the manual carefully before using the product. Please keep instruction. 1) Products cannot be used by children under 8 years of age or people with mental disabilities. If you need to use it, please do so under the supervision of a guardian. Please do not let children ride on the product or play with the product as a toy.
1.Safety Regulations 17) Do not place items at the suction outlet. Do not use product when suction is blocked. Clean dust, cotton wool, hair at the suction port to ensure smooth air circulation at the suction port. 18) Use the power cord carefully to avoid damage. Do not use the power cord to drag or pull the product and the product charging stand. Do not use the power cord as a handle. Do not clamp the power cord into the door seam. Do not pull the power cord at sharp corners.
2.Product Composition 2.1 Assembly Name ► Master Key (Start or Pause) - ower Vision Sensor -L - Universal Wheel ---- Right Brush �--- Charging Pole Piece ------=�B����ir:::::'1���:----- Left Brush Dust Box / Water Tank Switch- j --\c--------+11--111UI _....,.��L___ _ -----..i,.;;;;;;::.,....,,....,.
2.Product Composition ► Charging Stand Assembly � - - Indicator Light - - Power Adapter � - - - Power Adapter Slots ► Remote Control -+-+----11----- Screen Forward---+---1--:==:::::;--� Setting time / Schedule-------H-+--4,!;!V Left-----11--1-+;n Right Stop/Start ------ir---r------;r;7'1------l.---ll---- Backward !/r2i!',-+--1f---- Spot cleaning �---+----Auto cleaning Full Go Wall following -----tt----'.
2.
2.Product Composition 2.2 Technical Parameters Master Working Voltage: 10.89 V = Power Rating: 20W Charging Stand Rated Input Voltage: 19 V = Rated output current: 0.6A Battery and Specifications Adapter : Lithium Battery 2600mAh Output parameter 100-240V ~50/60HZ Input parameter 19VDC/0.
3.Product Composition 3.1 Considerations Please refer to the following guidelines to check the cleaning area before the turning on the unit for a more efficient clean. 0 0 Power lines and other debris scattered on the Please roll the carpet tassels or work on ground may trip up and must be removed before. short-hair rugs. • _J -• \.a� ,_, • �- A gap of less than 8 cm on the bottom of the A guard rail should be placed at the edge of the furniture may catch the product.
3.Product Composition 3.2 Rapid Operation Charging Preparation D Connect the adapter to the charging stand. Place the charging stand flat against the wall. Do not place objects in the left and right 1 M and the front 2M, and do not have objects with strong reflection surfaces such as mirrors. Place the charging stand Connect the power supply fJ Install the Side Brushes.
3.Product Composition Start to charge. D Turn on the Master. Tum on the side power switch, "I" is the tum on, "O" is the tum off. After the master finishes working, it is recommended not to shut down; keep the master in a state of charge so that it can perform its next job better. fJ Master Charge Place the master in the charging stand and pay attention to the charging pole piece. Tum on the power switch, the robot will enter standby mode.
3.Product Composition Start Cleaning Start the Automatic Cleaning Mode with the master's @ key or remote control ®key D [J nnnn l!lll!lj OU LJ LJ Before starting the mode, make sure that the outer ring of the @ key is red/blue and the master is in the state of being awakened. If the master does not wake up, short press the master @ or remote control @ key to wake it up. The master enters the sleep state after 1 0 minutes of standby, and the @ key light is off.
3.Product Composition 3.3 Mode Selection In order to adapt to different ground conditions and achieve deeper clean, this product has a variety of cleaning modes, which can be selected by remote control as needed. The remote control can switch any mode directly. Before starting the mode, make sure that the outer ring of the @ key is red/blue and the master is in the state of being awake. lf the master does not wake up, short press the master@ or remote control @ key to wake it up.
3.Product Composition Turbo Mode Robot will increase suction. Suitable for a D very dirty floor or a thick carpet. Qrurbo mode cannot be accessed while using the mop cleaning method. Time and Date Settings 1. Programming the Time and Date a . Settings of current weekday: In the standby mode, press the " iCl)l" button to enter the setting of current week day; press the "©" " (E) " buttons to switch Monday/Sunday; press the"@" to save the current week day and enter the setting of current hour/minute. b .
3.Product Composition 3.4 Use of Water Permeable Rag This product is equipped with a water tank assembly. After the cleaning work is completed, if there is a demand for mopping, the dust box can be replaced with a water tank assembly. For the cleaning method, please refer to the [Maintenance] section in this manual. Do not use the water tank assembly on the carpet. When cleaning with the rag function, fold the edge of the carpet to avoid foreign matter on the rag from soiling the carpet.
3.Product Composition 3.5Roller Brush Assembly Assembly Choices Roller brush assembly: Scratch the floor, sweep effectively. Set roller brush assembly : set the roller brush and cover the board and then press to lock.
4.Maintance 4.1 Dust Box and Filter When cleaning and maintaining the master and its accessories, turn off the master and unplug the charging stand. ■ Remove the dust box, open the dust box cover, and clean the garbage. )) STEP 01 ■ Remove dust filter. HEPA is not recommended for washing. Please pat and remove ash. STEP 02 ■ ■ Flush the dust box and the primary filter. Dry the dust box and dust filter assembly and keep it dry to ensure its service life. '.,.
4.Maintance 4.2 Water Tank Assembly Cleaning of Water Rag ■ Remove: After the mopping is completed, remove the water tank assembly, and remove the water permeable rag. STEP 01 ■ Maintenance: Rinse and dry the water rag ---,,, ,., STEP 02 ■ Cleaning the Water Reservoir Remove: After mopping the floor, remove the water tank assembly, remove the wat er permeable clot h, and pour off the remaining water in the water reservoir. Maintenance: Dry the reservoir and allow it to dry.
4.Maintance 4.3 Rolling Brush, Side Brushes ■ Cleaning Rolling Brush Remove the rolling brush cover plate, remove the rolling brush, cut off the hair round on the rolling brush, and facilitate cleaning. STEP 01 ■ Cleaning Side Brushes Pull out the side brush and wipe it with a clean rag.
4.Maintance 4.4 Other Assembly ■ Clear down the sensor to ensure ■ Clean the universal wheel to the sensitivity of the sensor. reduce hair entangled . ■ To clean the charging pole pieces, use a dry rag to clean the charging poles on the bottom of the master or the charging stand. Do not use this product for a long time, please remove the battery and keep it in a safe place. If the battery leaks, remove the battery and wipe the battery compartment clean.
5.Lighting Effects And Alarm Tips 5.
5 Lighting Effects And Alarm Tips 5.2Alarm Tips When the host fails, the red light of the outer ring of the host key flashes, and the buzzer sounds of different lengths will be emitted. Refer to the following table to check the cause of the fault: Cleaner status AUTO Dis la Status Side brush error Fan motor error Red lamp light on Please check if the side brush is entangled and clean the side brushes. Red lamp light on three sounds three limes Please check the garbage and air duct outlet.
6.FAQ If the following problems occur during the use of the product, you can solve it yourself by checking the queries. No Cause of Falli.n, 01 Master cannot charge 02 The master is in trouble when working 03 After the clean ing is complete d, the host returns to charging. 04 05 06 The master did not automatically clean up according to the scheduled time The remote control is out of order.
www.mygenieshop.com.au Consumer Warranty MyGenie would like you to enjoy your new purchase. This warranty card is provided to ensure that you get satisfaction. Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure for any other reasonably foreseeable loss or damage.
