Manual

WARRANTY & SERVICE

Myron L Agri-Meters, excluding the pH sensor,

have a two-year warranty. The pH sensor has a 6

month limited warranty. If an instrument fails to

operate properly, check the batteries, calibrations,

and cleanliness of the pH sensor bulb. If it still fails

to properly function, return it prepaid to the Myron

L Company.

If in the opinion of the factory, failure was due to

materials or workmanship, repair or replacement

will be made without charge. A reasonable service

charge will be made for diagnosis or repairs due to

normal wear, abuse or tampering. This warranty is

limited to the repair or replacement of the Myron L

Agri-Meter only. The Myron L Company assumes

no other responsibility or Liability.

ACCESSORIES

CONDUCTIVITY STANDARD SOLUTIONS

YourAgri-Meter has been factory calibrated with a Standard

Solution of 3.9 millimhos (3900 micromhos) conductivity. You can

keep your meter accurate by using this same Standard Solution. All

Myron L Company Conductivity Standard Solutions are within 1.0%

of Potassium Chloride reference solutions. The concentrations of

the reference solutions are calculated from data in the International

Critical Tables, Vol. 6.

pH STANDARD BUFFER SOLUTIONS: Ready to use, Myron L

Company pH buffer solutions are mold inhibited and accurate to

within +0.06 pH units @ 25°C. They are traceable to National Bureau

of Standards certified pH references and are color-coded for instant

identification.