Operation Manual
LIBRARY
The VR3 can store a dierent library of default NAD codes for each of its
DEVICE SELECTOR “pages.” If the original default library does not control
your NAD CD player, DVD player, or other component, follow the procedure
below to change the library code. Refer as well to the table below for a list
applicable NAD Library Codes with their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example: Load NAD DVD Player T 517 library codes to VR3’s “CD” device.
1 Press and hold [CD] in the DEVICE SELECTOR section of VR3.
2 While holding down the device button [CD], press “2” and “2” using
VR3’s numeric buttons. “22” is the corresponding library code for T 517.
3 Press [ENTER] while still holding down the device button [CD]. The
CD device selector will ash once to indicate that the library input is
successful. Both the device selector button [CD] and [ENTER] can now
be released.
RESET THE VR3 TO ITS DEFAULT SETTINGS
The VR3 can be restored to its factory settings, including default libraries, by
the following procedures
1 Press and hold [ON] and [DELETE] buttons for about 10 seconds until
the AMP device button lights up.
2 Within two seconds of the AMP device button lighting up, release both
buttons. If the reset mode is successful, the [CD] device button will ash
twice.
TABLE OF LIBRARY CODES APPLICABLE TO VR3 REMOTE CONTROL
LIBRARY CODE NAD PRODUCT DESCRIPTION
10 Default library for “AMP” page
11 Zone 2
20 Default library for “CD” page; C 515BEE, C 545BEE, C 565BEE
21 T 535, T 585, M55; DVD section of L 54, VISO TWO, VISO FIVE
22 T 513, T 514, T 515, T 517
23 T 587, T 557, T 577, M56
30 IPD 1
31 IPD 2
40
Default library for “TUN” page; Tuner section of C 725BEE, T 175,
T 737, T 747, T 755, T 765, T 775, T 785
41 C 422, C 425, C 426
42 C 445
NOTE
The VR3 may not necessarily contain all the control buttons applicable
for the above-mentioned NAD products. Use the prescribed remote
control of the specic NAD product for a full compliment of the
applicable remote control buttons.
IDENTIFICATI ON OF CONTROLS
REMOTE CONTROL
13
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ