Operation Manual
WHAT’S IN THE BOX
Packed with your VISO THREE you will nd
• IPD 2 gift box incorporated with the following
− NAD IPD 2 Dock for iPod
− Stereo RCA and 3.5mm stereo jack patch cord
− Dock Adapters
− IPD 2 DR 1 Remote Control with 3V CR2025 battery
− Universal switching adaptor with interchangeable plugs
• VISO THREE VR3 Remote Control with 2 (two) AA batteries
• VISO THREE detachable mains power cord
• AM loop antenna
• FM lead-type antenna
• Owner’s manual in CD-ROM
SAVE THE PACKAGING
Please save the box and all of the packaging in which your VISO THREE
arrived. Should you move or otherwise need to transport your VISO THREE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the VISO THREE’s front panel and your primary
listening/viewing position—this will ensure reliable infrared remote control
communications. Avoid placing the unit in direct sunlight or near sources
of heat and damp.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD VISO THREE, we provide the following “Quick Start” instructions to get
you underway.
Please make all the connections to your VISO THREE with the unit
unplugged. It is also advisable to power-down or unplug all associated
components while making or breaking any signal or AC power connections.
PLAY A CD
1 Connect your speakers to the LEFT and RIGHT speaker terminals and
input sources to the applicable rear panel input sockets.
2 Connect the mains power cord to the VISO THREE’s AC mains input
and then plug into a mains power source. The Standby LED indicator
embedded around the bezel of the STANDBY button will illuminate
amber and the VISO THREE goes to standby mode.
3 Press the front panel STANDBY button to turn ON the VISO THREE. The
Standby LED indicator will turn from amber to blue.
4 Press the [OPEN/CLOSE] button to draw open the disc tray. Place a
CD, label side up, in the tray’s circular recess. Be certain that the disc is
centered within the recess.
5 Press [PLAY/PAUSE] button. The drawer closes automatically and the
disc begins to play.
INTRODUCTION
GETTING STARTED
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ