User Guide

Page 39
5-2 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that
at least
two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important
that a means of reaching the height safely, without stretching, is available.
(e.g. steps, step stools etc.)
1. Place the Header assembly on to the monitor cabinet and slide it
backwards so that it engages under the retaining bracket.
2. Fix the Header asembly with two pozi head screws (with flat and spring
washers) (M6x30).