User Guide

Page 52
6-3-3-2 Ride Test
1. Select “Ride Test” on the I/O menu screen and press enter to test the
ride air springs. The following screen is displayed.
2. Press the start switch to begin the test.
3. The air springs are operated to move the seat in the following
sequence:-
Front up -
>
Rear up -
>
Left up -
>
Right up -
>
After checking the seat movement, ‘CHECK END’ appears on the
screen. If all movement is correct ‘OK’ appears on the screen.
Otherwise ‘NG’ appears on the screen.
4. To cancel the test whilst the test is active, press the start button. The
‘I/O TEST’ screen reappears.
RIDE TEST
GET OFF THE SEAT & PUSH START
FL : 0000 FR : 0000
OK OK
RL : 0000 RR : 0000
OK OK
START : START ENTER : ENTER